S235JR (+N) is a non-alloy structural steel. We have large quantities of S235JR in stock with thicknesses up to 200 mm. The minimum thickness is normally 5 mm
Plates are available up to 3.5m wide and 14m long. Most plates are certified to EN10204 3.2 and normally come from a European mill – typically Tata, Arcelor or Clabecq so you can be assured of good quality in these commodity steel plates. S235JR plates thicker than 50 mm typically comes from Dillinger or the plate rolling mill at Dunkirk
We also have normalised S235 plates available
S235JR Steel Plates Available Ex-Stock
- Thickness: 5 – 200 mm
- Width: Up to 3.5 metres wide
- Length: Up to 14 metres long
- Certification: EN10204 3.1/3.2
- Steel Number:1.0038
- Delivery Condition: As Rolled or Normalised
Note for Asian Customers: We only quote for thick plate or plates with special requirements as most requirements can be met from local Asian stockholders. This typically means that we will automatically decline any enquiries for plates less than 100 mm thick
For customers in Europe S355J2+N plate can be ordered direct from Dillinger or from stock from AncoferWaldram. The EN 10025-2 standard can be purchased from the BSI
Structural Steel Chemical Composition
Grade | Standard | Number | C (max) <40 | C (max) > 40mm | Si | Mn | P | S | Nb | V | Al | Ti | Cr | Ni | Mo | N | Cu |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
S235JR+N | EN10025-2:2004 | 1.0038 | 0.19 | 0.23 | - | 1.5 | 0.045 | 0.045 | 0.014 | 0.60 | |||||||
S355J2+N | EN10025-2:2004 | 1.0577 | 0.23 | 0.24 | 0.55 | 1.7 | 0.035 | 0.035 | - | 0.60 | |||||||
S355K2+N | EN10025-2:2004 | 1.0596 | 0.23 | 0.24 | 0.55 | 1.7 | 0.035 | 0.035 | - | 0.60 | |||||||
S355N | EN10025-3:2004 | 1.0545 | 0.22 | 0.22 | 0.55 | 0.85 to 1.75 | 0.035 | 0.030 | 0.06 | 0.14 | 0.015 | 0.06 | 0.35 | 0.55 | 0.13 | 0.017 | 0.60 |
S355NL | EN10025-3:2004 | 1.0546 | 0.20 | 0.20 | 0.55 | 0.85 to 1.75 | 0.030 | 0.025 | 0.06 | 0.14 | 0.015 | 0.06 | 0.35 | 0.55 | 0.13 | 0.17 | 0.60 |
S460N | EN10025-3:2004 | 1.8901 | 0.22 | 0.22 | 0.65 | 0.95 to 1.80 | 0.035 | 0.030 | 0.06 | 0.22 | 0.015 | 0.06 | 0.35 | 0.85 | 0.13 | 0.027 | 0.60 |
S460NL | EN10025-3:2004 | 1.8903 | 0.22 | 0.22 | 0.65 | 0.95 to 1.80 | 0.030 | 0.025 | 0.06 | 0.22 | 0.015 | 0.06 | 0.35 | 0.85 | 0.13 | 0.027 | 0.60 |
S355M | EN10025-4:2004 | 1.8823 | 0.16 | 0.16 | 0.55 | 1.7 | 0.035 | 0.030 | 0.06 | 0.12 | 0.015 | 0.06 | 0.35 | 0.55 | 0.13 | 0.027 | 0.60 |
S355ML | EN10025-4:2004 | 1.8834 | 0.16 | 0.16 | 0.55 | 1.7 | 0.030 | 0.025 | 0.06 | 0.12 | 0.015 | 0.06 | 0.35 | 0.55 | 0.13 | 0.027 | 0.60 |
S460ML | EN10025-4:2004 | 1.8838 | 0.18 | 0.18 | 0.65 | 1.8 | 0.030 | 0.025 | 0.06 | 0.14 | 0.015 | 0.06 | 0.35 | 0.85 | 0.23 | 0.027 | 0.60 |
Mechanical Properties of Structural Steel Grades
Steel Grade | Standard | Number | Tensile Strength 3 to 100mm | Tensile Strength 100<400mm | Yield Strength | <16mm | 16-40mm | 40-63mm | 63-80mm | 80-100mm | 100-150mm | 150-200mm | 200-250mm | 250-400mm | Minimum Elongation (3-40mm) | CVN Temperature | CVN Energy |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
S235JR+N | EN10025-2:2004 | 1.0038 | 360 to 510 | 340 to 500 | 235 | 225 | 215 | 215 | 215 | 195 | 185 | 175 | 26 | 20C | 27J | ||
S355J2+N | EN10025-2:2004 | 1.0577 | 470 to 630 | 450 to 600 | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 | 265 | 22 | -20C | 27J | |
355K2+N | EN10025-2:2004 | 1.0596 | 470 to 630 | 450 to 600 | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 | 265 | 20 | -20C | 40J | |
S355N | EN10025-3:2004 | 1.0545 | 470 to 630 | 450 to 600 | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 52 | 22 | -20C | 40J | ||
S355NL | EN10025-3:2004 | 1.0546 | 470 to 630 | 450 to 600 | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 22 | -20C | 47J | |||
S460N | EN10025-3:2004 | 1.8901 | 540 to 720 | 530 to 710 | 460 | 440 | 430 | 410 | 400 | 380 | 370 | 17 | -20C | 40J | |||
S460NL | EN10025-3:2004 | 1.8903 | 540 to 720 | 530 to 710 | 460 | 440 | 430 | 410 | 400 | 380 | 370 | 17 | -20C | 47J | |||
S355M | EN10025-4:2004 | 1.8823 | 440 to 630 | 430 to 590 | 355 | 345 | 335 | 325 | 325 | 320 | 22 | -20C | 40J | ||||
S355ML | EN10025-4:2004 | 1.8834 | 440 to 630 | 430 to 590 | 355 | 345 | 335 | 325 | 325 | 320 | 22 | -20C | 40J | ||||
S460ML | EN10025-4:2004 | 1.8838 | 500 to 680 | 490 to 660 | 460 | 440 | 430 | 410 | 400 | 385 | 17 | -20C | 40J |
Steel Grade | Max CEV <16mm | Max CEV <30mm | Max CEV 16 - 40mm | Max CEV 30 - 40mm | Max CEV 40 - 633mm | Max CEV <63mm | Max CEV 40 - 150mm | Max CEV 63 - 100mm | Max CEV 63 - 150mm | Max CEV 150 - 200mm | Max CEV 100 - 250mm | Max CEV 250 - 400mm |
---|---|---|---|---|---|---|---|---|---|---|---|---|
S235JR+N | 0.35 | 0.35 | 0.38 | 0.40 | ||||||||
S355J2+N | 0.45 | 0.47 | 0.47 | 0.49 | 0.49 | |||||||
355K2+N | 0.45 | 0.47 | 0.47 | 0.49 | 0.49 | |||||||
S355N | 0.43 | 0.45 | 0.45 | |||||||||
S355NL | 0.43 | 0.45 | 0.45 | |||||||||
S460N | 0.53 | 0.54 | 0.55 | |||||||||
S460NL | 0.53 | 0.54 | 0.55 | |||||||||
S355M | 0.39 | 0.39 | 0.40 | 0.45 | ||||||||
S355ML | 0.39 | 0.39 | 0.40 | 0.45 | ||||||||
S460ML | 0.45 | 0.46 | 0.47 | 0.48 |