EN10028-3 P460NH Steel Plates

Hot dished and water-quenched P460NH segments being trial-fitted on the shop floor into a toriconical course

P460NH to EN10028-3 is a high strength fine grained steel for pressure vessels and boilers.

We keep P460NH plates in stock in a range of thicknesses from 8 – 30 mm and a standard range of dimensions. 2m, 2.5 and 3m wide and up to 12m long.

The P460NH plates are all certified to EN10204 3.2 or 3.1 and are normally from the German steel mill, Dillinger Hutte

Plates are normally available for collection on an EXW basis the next day if no cutting is required. However when shipping overseas from Antwerp you need to have the plates in the Port a number of days before closing in order to ensure that they are stuffed and lashed into the container

P460NH Steel Plates Available Ex-Stock

Thickness: 8 – 30 mm

Width: Up to 3 metres wide

Length: Up to 12 metres Long

For customers in Europe P460NH plate can be ordered direct from Dillinger or from stock from AncoferWaldram. The EN 10028-3 standard can be purchased from the BSI

P460NH Pressure Vessel Steel Chemical Composition

Steel Grade	C	Si	Mn	Mn (Min)	P	S	Al	N	Cr	Cu	Mo	Nb	Ni	Ti	V	Nb+Ti+V
P460 NH	0.2	0.6	1.7	1.1	0.025	0.01	0.02	0.025	0.3	0.7	0.1	0.05	0.8	0.03	0.2	0.22

This table provides the main features of the chemical composition of different grades P460NH boiler plate steel as required by EN10028-3:2009. It is not complete as we have not included many of the minor use cases. These may have a major impact in your application so please use this for reference purposes only and refer to your original and up to date copy of the relevant standard