Plate Thicknesses

We focus on having a wide range of plate thicknesses available. This provides you with a large ranges of options for your design and production enabling the production cycle to be kept short.

The table below is an indication of the thicknesses that are available in each category. So for structural steel we range from 0 – 300mm. This doesn’t mean that the whole range of thicknesses are available for each grade.

The table merely shows what is typically available. So you could find S355 J2 +N plates available up to 300 mm, but S355 K2 + N only has up to 200 mm. However within the bounds of the stock we keep for each grade you can expect to find plates available in the listed thicknesses most of the time.

Sometime you won’t and that will generally be because there has been a large demand for a particular grade or thickness and we are waiting for a mill delivery to re-stock.

Unlike many stockholders who have run their stock levels down over the last 5 years we have slowly and consistently increased out levels and pride ourselves on the high availability that we give to our customers.

We have put the thickness in inches next to each column. This is for guidance only. We don’t stock plates in imperial measurement and so when you require a 1 inch thick plate you will generally be offered a 25mm or 28mm plate depending on your particular needs and design. When in doubt we will offer a plate thicker than you require.

A fuller range of thicknesses is available for orders from the mill. Dillinger Hutte is able to produce the exact thickness that you require for your design to EN10029 or other appropriate standards

Plate Thicknesses available

These are the typical thickness available for each category of steel. This is modified for what is available for each grade but you will generally find availability for most of the thicknesses between the minimum and maximum. This of course depends on stock levels and market conditions
Offshore Steel Plate (mm)Offshore Steel Plate (Inches) Structural Steel Plate (mm) Structural Steel Plate (Inches)Pressure Vessel Steels (mm)Pressure Vessel Steels (Inches)Shipbuilding Plate (mm)Shipbuilding Plate (Inches)Wear and Abrasion Resistant Steel Plate (mm)Wear and Abrasion Resistant Steel Plate (Inches)
100.3950.250.250.280.31
110.4360.2460.2460.2490.35
120.4780.3180.3180.31100.39
130.5190.35100.3990.35110.43
140.55100.39120.47100.39120.47
150.59110.43130.51110.43130.51
160.63120.47140.55120.47140.55
170.67130.51150.59130.51150.59
180.71140.55160.63140.55160.63
200.79150.59180.71150.59170.67
220.87160.63200.79160.63180.71
250.98170.67220.87170.67200.79
281.1180.71250.98180.71220.87
301.18200.79281.1200.79250.98
321.26220.87301.18220.87281.1
351.38250.98321.26250.98301.18
381.5281.1351.38281.1321.26
401.57301.18401.57301.18351.38
451.77321.26451.77321.26381.5
501.97351.38501.97351.38401.57
552.17381.5552.17381.5451.77
602.36401.57602.36401.57501.97
652.56451.77652.56451.77552.17
702.76501.97702.76501.97602.36
752.95552.17803.15552.17652.56
803.15602.36903.54602.36702.76
903.54652.561003.94652.56752.95
1003.94702.761104.33702.76803.15
752.951204.72752.95903.54
803.151305.12803.151003.94
903.541405.51903.541104.33
1003.941505.911003.941204.72
1104.331606.31104.33
1204.721807.091204.72
1254.922007.871254.92
1305.121305.12
1405.511405.51
1505.911505.91
1606.3
1706.69
1807.09
1907.48
2007.87
2108.27
2309.06
2509.84
30011.81