P355GH Pressure Vessel Steel Plates

Heavy Steel P355GH Plates to EN10028-3 in Stock

Heavy Steel P355GH Plates to EN10028-3 in Stock

P355GH is a fine grained steel for pressure vessels and heat exchangers. It is according to EN10028-3.

We carry a large stock of P355GH with plate thicknesses available up to 150 mm and plate dimensions up to 3m wide and 12 metres long.

P355GH plates are all from Western Europe with most plates from either German, French or Belgian steel mills.

All of our P355GH boiler plates have certification to EN10204. Certificates can be wither to 3.1 or 3.2 with most plates coming with 3.2 as a standard

Generally plates can be delivered very quickly to Antwerp for shipping to Asian ports – we are less than an hours drive from the Port of Antwerp – and this means that we can often meet closing times that other stockholders who are further away cannot.

P355GH Steel Plates Ex-Stock

Plates are available ex-stock in a wide range of thicknesses and dimensions

  • Thickness: 6 – 150 mm
  • Width: Up to 3 metres wide
  • Length: Up to 12 metres long

For customers in Europe P355GH plate can be ordered direct from Dillinger or from stock from AncoferWaldram. The EN 10028-3 standard can be purchased from the BSI

P355 GH Pressure Vessel Steel Chemical Composition

Steel GradeCC (Min)SiMnMn (Min)PSAlNCrCuMoNbNiTiVCR+Cu+Mo+Ni
P355 GH0.220.10.61.71.10.0250.010.020.0120.30.30.080.040.30.030.020.7
This table provides the main features of the chemical composition of different grades of P355GH boiler plate steel as required by EN10028-2:2009. It is not complete as we have not included many of the minor use cases. These may have a major impact in your application so please use this for reference purposes only and refer to your original and up to date copy of the relevant standard