P275NH Pressure Vessel Steel Plate

Distilling column made of EN10028-3 P275NH Pressure Vessel Steel

Distilling column made of EN10028-3 P275NH Pressure Vessel Steel

P275NH to En10028-3 is a weldable fine grained pressure vessel steel for use by fabricators of boilers, pressure vessels and heat exchangers. It is designed for used at medium or high temperature.

As one of the world’s leading steel stockholders we have one of the largest stocks of P275NH available in Europe and this is available for next day dispatch depending on your cutting and additional testing requirements.

P275NH plates, steel number 1.0487, are available in a wide range of thicknesses from 10mm to 100mm; widths in 2m, 2.5m and 3m; lengths up to 12m

Plates are usually from German mills and come with EN10204 MTCs to either 3.1 or 3.2

P275NH Plates Ex-Stock

Plates are available ex-stock in a wide range of thicknesses and sizes

Thickness:  6 – 200 mm

Width: Up to 3 metres wide

Length: Up to 14 metres long

For customers in Europe P275NH plate can be ordered direct from Dillinger or from stock from AncoferWaldram. The EN 10028-2 standard can be purchased from the BSI

P275 Pressure Vessel Steel Chemical Composition

Steel GradeCC (Min)SiMnMn (Min)PSAlNCrCuMoNbNiTiVNb+Ti+V
P275 NH0.160.41.50.80.0250.010.020.0120.30.30.080.050.50.030.050.05
P275 NL10.160.41.50.80.0250.0080.020.0120.30.30.080.050.50.030.10.12
This table provides the main features of the chemical composition of different grades of P275 boiler plate steel as required by EN 10028:2009. It is not complete as we have not included many of the minor use cases. These may have a major impact in your application so please use this for reference purposes only and refer to your original and up to date copy of the relevant standard