We have an extensive stock of ASME/ASTM A516 Boiler Plate. Our focus is in supplying very high quality plates for demanding applications in the oil and gas industry. As a result we have a large proportion of very heavy plates over 50mm, and going up to 300mm, and are able to meet significant requirements on an ex-stock basis.
Most of our high grade ASTM A516 plates have been independently tested and have an EN10204 3.2 certificate from Lloyds Register (or other globally recognised testing body). All plates have at least a 3.1 certificate.
ASME/ASTM A516 Boiler Plates Available Ex-Stock
ASTM/ASME A516 Background
ASTM A516 is a specification for carbon steel plates for moderate and low temperature service. The plates are generally used for the construction of welded pressure vessels when an improvement in notch toughness is required.
ASTM A516 (or ASME SA516) is available in four grades, Gr55, Gr60, Gr65 and Gr70 with tensile strengths ranging from 380MPa to 620MPa depending on the grade. Oakley Steel supplies A516 Grade 60 and A516 Grade 70. We supply ASTM A516 65 as HIC resistant plate – it is triple certified as A516 60/65/70 and meets the requirements of all three grades for that purpose.
Whilst it is possible for very thick plates (200mm) to be produced that meet the requirements of the standard the thickest generally available plates from stock are 150mm. Dillinger Hutte are world renowned for heavy plates and have produced some of the thickest A516 plates ever rolled
ASTM A516 steel plate is killed and has a fine austenitic grain size. Plates under 40mm thick can be supplied as rolled or normalised, whereas plates over 40mm thick are normalised.
A516 Steel Supplementary Requirements
The following supplementary requirements from ASTM A20 can be met by A 516:
- S1 – Vacuum treatment
- S2 – Product Analysis
- S3 – Simulated Post Weld Heat Treatment
- S4.1 – Additional Tensile Test
- S5 – Impact Test (Charpy Notch)
- S6 – Dropweight Test
- S7 – Hot Tensile Test
- S8 – UT (Ultrasonic Testing) to A435
- S9 – Magnetic Particle Examination
- S11 – UT to A577
- S12 – UT yo A578
- S17 – Vacum Carbon Deoxidised Steel
Some of the requirements are met through the mill production process whereas others such as PWHT, Impact testing and UT examination are available as additional tests.
A516 Pressure Vessel Steel Chemical Composition
|A516 65 as Dicrest only||0.26||0.45||0.13||1.3||0.79||0.035||0.035|
We have listed the chemical and physical properties of the grades on the table below to allow for clear comparison. ASME SA 516 gr 70 has the highest tensile and yield strength of the three grades and this is due to the higher carbon content of the steel. The other principal alloying elements are the same as the other two ASME SA 516 grades.
Generally the higher the grade, in this case ASME SA 516 gr 70, the higher quality steel it is considered to be and the wider the range of possible applications. Our experience is that customers tend to choose either ASME SA 516 gr 60 or ASME SA 516 gr 70, with ASME SA 516 gr 65 being less popular. This is because the small difference between the grades mean that many heats of A16 70 can be dual or triple certified for all three grades and the small price differential means that for procurement purposes the additional cost of procuring ASME SA 516 gr 70 is small, whilst the engineering and logistical benefits can be significant.
Our steel plates are of high quality and if you check summary the sample Mill Test Certificate on the test certs page you can see that the standard requirements are comfortably exceeded.
ASME and ASTM Standards are harmonised so ASME SA 516 gr 70 is exactly the same as ASTM A 516 gr 70. On some specifications this is written as ASTM/ASME A/SA 516 gr70 or a similar combination of the same meaning.
|A516 Grade 60||A 516 Grade 65||A516 Grade 70|
|Tensile Strength (ksi)||60-80||65-85||70-90|
|Tensile Strength (MPa)||415-550||450-585||485-620|
|Yield Strength (ksi)||32||35||38|
|Yield Strength (MPa)||220||240||260|
|Elongation in 200mm (%)||21||19||17|
|Elongation in 50mm (%)||25||23||21|
|Max Thickness (mm)||205||205||205|